REQUEST A QUOTE
Are you interested in getting more information or a quote for the 1255? Please fill out the form below and one of our Territory Managers will be in touch shortly.
VALMAR 1255 Pull-Type INTER-ROW BANDING OR BROADCAST Applicator
When only the most accurate rates and precise product placement will do
Air Manifold Gauge
A pressure switch measures air manifold pressure using inches of water column. The switch is connected to the in-cab control with warning light and buzzer to warn of insufficient air pressure, ensuring proper application.
Manifold-Venturi System and Funnel Tray
The venturi and manifold systems can be lowered by means of a quick release. Funnel trays are inserted for collection of product when calibrating or emptying the unit.
Hopper Bottom Slide Gates
Manually operated slide gates stop product flow to the metering system, allowing you to remove the roller for cleaning or servicing.
Calibration Hand Crank
To make calibrating a product as precise and easy as possible, a hand-crank is provided to turn the metering system. The product can be collected by using the funnel trays and weighed for determining exact application rates.
In-Cab Control
The dual electric clutch control allows you to operate the metering system from the operator’s seat. Two magnetic clutches and in-cab control allow half shut-off on either side.
Specifications
Hopper:
18 cubic feet
409 stainless steel with a two-component epoxy primer and a two-component, cross-linked acrylic top coat
Weather tight lid
Product level sight gauge
Metering:
Ground driven
Half shut off on either side
Comes with two types of metering roller
28-groove rollers for fine granulars and small seeds
12-groove rollers for fertilizer and large seeds
In-cab electric clutch control and air manifold monitor
60-speed gearbox with five percent between settings
Air manifold and venturi system drop for easy cleaning
Half width shut off on either side
Fan:
18-inch impeller with three-inch outlet
Operates at 3200-4000 RPM
Hydraulic or gas engine fan drive
Hydraulic – 2.2 CID motor requires 8 GPM; hydraulic lines to hitch included (customer supplied connectors); includes sheaves, belt, shields, flow control with check valve
Gas engine – 9 HP engine; comes with cyclone air cleaner; includes centrifugal clutch, engine mount, sheaves, belt and shields
Note: Engine ordered separately
Booms:
Broadcast or Inter-row banding boom
Broadcast Boom:
Self-leveling boom frame
Six left-hand and six right-hand broadcast deflectors
24-foot boom (can be extended to 20 or 24 feet with optional extension kits)
Adjustable boom height
1.25-inch ID, PVC Hose
Inter-row Banding Boom:
Two stainless steel assemblies with six drop tubes
Telescoping to accommodate various row spacing up to 10 feet
Adjustable angle and height provide different band application widths
Also includes a 7-foot, non-folding broadcast boom with breakaways for inter-row broadcasting with 12 drop tubes
1.25-inch ID, PVC hose
Chassis:
1,500-pound rubber torsion axle
Five-bolt hubs
P265/50R15 tires
Tail lights
Safety chains
Clevis type hitc
Options:
Foam marker
4- or 8-foot broadcast boom extension
Dimensions/Shipping Information:
Height: 6 ft.
Width: 6 ft. 10 in.
Length: 8 ft. 7 in.
Weight: 1,080 lb.