Request a Quote
Are you interested in a quote or demonstration of the HALO? Please fill out the form below and one of our Territory Managers will be in touch shortly.
Halo - AerWay
HALO AerWay combines Salford’s industry leading AerWay aerators with Salford’s high clearance independent blade mounts, and finishing systems for the best in soil aeration and residue management. This unique machine is designed to run up to 8 inches deep with AerWay’s unique forged Shattertine. The Shattertine’s cut through residue running to a row, spaced 10 inches apart. The tine itself is shaped to bite into the soil and fracture the ground, improving air and moisture storage capacity. The gang angle settings allow the operator to quickly increase or decrease how aggressive the operation is.
The HALO AerWay’s wavy coulter blades run on either side of the tines, further sizing residue and beginning to close the pockets left by the Shattertines. The coulter angle is also adjustable, allowing for straight residue cutting or more aggressive leveling power. The HALO AerWay is followed by double 14 inch rollers controlled by a single point hydraulic pressure system. The new level linkage helps follows ground contours and has a tighter design with fewer parts for easy maintenance and narrow transport.
HALO AERWAY MODEL OVERVIEW
HALO FRAME OVERVIEW
FEATURES & BENEFITS
High Speed and Highly Durable
Excellent obstacle protection
HALO AerWay’s front gang of Shattertines is protected by a C-Flex hanger.
The second row of individually mounted blades have rubber torsion suspension that are capable of up to 7.5 inches of vertical deflection for obstacle protection in rough and rocky conditions.
Each blade faces rocks and obstacles on their own which lessens the load put on the HALO AerWay frame.
Superior Leveling
HALO uses hydraulic wing down pressure with an accumulator to ensure level operation at high speeds.
HALO’s 13 wave blades help level the pockets left by the Shattertines and condition residue.
Easy to operate
The HALO AerWay is simple to set! Single point depth control, hydraulic fore/aft leveling and a single point control for setting pressure on the finishing tool.
The operator convenience station keeps implement connections protected, organized and at the operator’s finger tips. The color coded hose grips take out the guess work when connecting Salford implements to the tractor.
The HALO’s narrow forward fold design makes the machine safe and easy to transport.
Low maintenance design
The heavy duty trunnion bearings on the Shattertine gang are maintenance free.
Durable, sealed blade hubs make for much less maintenance on the HALO. The blades hubs can be rebuilt to save cost on seasonal maintenance.
The HALO has three easily accessible grease points, the main frame hinges, axles and roller frames.
Standard Features
HP Requirements of 10-14 HP/FT depending on working depth
Working depth: up to 8 in. on tines, 4 in. on blades
Operating Speed of 8.5 mph up to 12 mph
Front row 8” AerWay Shattertine on manually adjustable angle - 2.5°, 5° and 7.5°
Rear row 13 wave straight blades on manually adjustable angle - 0°, -1.5° and -3°
Net 5” spacing; 10” spacing per row; 10” spacing center to center on tines, 10” spacing on blades (offset)
C-Flex suspension on AerWay gangs, 4pc rubber torsion suspension on coulter mounts
Sealed maintenance free Trunnion bearing on AerWay gangs; Multi-lip sealed, maintenance free re-buildable hubs on coulters
Single point depth control
Single point finishing tool pressure
Hydraulic fore/aft leveling with accumulator protection on tilt
Hydraulic wing down pressure
Factory setup included; minimal finishing tool assembly. Must pin on finishing tools; hydraulics are pre-plumbed
Tires
600/50R22.5
Finishing Options
Standard double 14” rollers on level link
VIDEO
Specifications
HALO | |||||
---|---|---|---|---|---|
Configuration | |||||
Model Size | 20' (6.096 m) | 25' (7.62 m) | |||
Approximate Weight (lbs) | 18,580 lb | 20,780 lbs | |||
Driving Interval | 20 ft. 2 in. | 25 ft. 3 in. | |||
Rows of Shattertines | 24 | 30 | |||
13 Wave coulters | 25 | 31 | |||
Transport Height | 12 ft. 7 in. | 12 ft. 9 in. | |||
Frame Sections | 2 | 2 | |||
Mainframe structure | 6 in. x 6 in. tubular steel | ||||
Hitch Structure | 6 in. x 8 in. tubular steel | ||||
Tires, Mainframe | 600/50-22.5, 10 bolt hub | ||||
Tires, Wings | N/A | ||||
Drawbar Hitch | CAT 4 | ||||
Hitch | 8,000 lbs manual jack | ||||
Hydraulic Remote Valves Required | 4 |