Request a Quote
Are you interested in a quote or demonstration of the HALO? Please fill out the form below and one of our Territory Managers will be in touch shortly.
Halo - HSD
The HALO HSD is engineered for level operation at speed and with the clearance needed for tough conditions. HALO HSD’s individually mounted blades allow for maximum residue and soil flow, while the angled blade mounting arms are designed to keep the HALO HSD at depth in hard ground.
HALO HSD has advanced hydraulic systems that are simple to operate. Fore/aft leveling, active down pressure, single point depth control, and finishing systems all have hydraulic adjustment that is easy to use.
HALO HSD MODEL OVERVIEW
HALO FRAME OVERVIEW
FEATURES & BENEFITS
High Speed and Highly Durable
High Clearance
Independently mounted blades allow for excellent soil and residue flow through the machine.Excellent obstacle protection
Independently mounted blades with rubber torsion suspension are capable of up to 7.5 inches of vertical deflection for obstacle protection in rough and rocky conditions.
Each blade faces rocks and obstacles on their own which lessens the load put on the HALO HSD frame.
Superior Leveling
HALO uses hydraulic wing down pressure with an accumulator to ensure level operation at high speeds.
HALO’s blades are tipped under which pulls the machine into the ground, ensuring that the implement stays at the proper operating depth, even in hard ground.
Easy to Operate
The HALO HSD is simple to set! Single point depth control, hydraulic fore/aft leveling and a single point control for setting pressure on the finishing tool.
The operator convenience station keeps implement connections protected, organized and at the operator’s finger tips. The color coded hose grips take out the guess work when connecting Salford implements to the tractor.
The HALO’s narrow forward fold design makes the machine safe and easy to transport.
Low Maintenance Design
Durable, sealed blade hubs make for much less maintenance on the HALO.
The HALO has easily accessible grease points for easy maintenance and better machine longevity.
Standard Features
HP Requirements of 12-18 HP/FT depending on working depth
Working depth 3 - 5”
Operating Speed of 8.5 mph minimum up to 14 mph
Front row blades on compound 14° open angle and 4° tipped under angle, 22” smooth low concavity blades
Rear row blades on compound 17° open angle and 4° tipped under angle, 22” notched low concavity blades
Net 5” spacing; 10” spacing per row
4 piece rubber torsion suspension on coulter mounts
Blades hubs: Double tapered roller bearing, multi-lip sealed, maintenance free
Single point depth control
Hydraulic finishing tool pressure
Hydraulic fore/aft leveling
Hydraulic Wing Down pressure / Accumulator Protection on tilt
Factory setup included; minimal finishing tool assembly. Must pin on finishing tools; hydraulics are pre-plumbed
Tires
600/50R22.5
Finishing Options
Standard 23" round bar cage roller
Optional: OTICO Wave-Profile FARMFLEX® Rubber Roller - 23" rubber packer roller with scraper system
Optional: Double 14” rollers
Specifications
HALO | |||||
---|---|---|---|---|---|
Configuration | Specifications | ||||
Model Size | 20' (6.096 m) | 25' (7.62 m) | 30' (9.144 m) | 35' (10.668 m) | 40' (12.192 m) |
Approximate Weight (lbs) | 15,440 | 19,300 | 26,100 |
27,800 |
29,100 |
Driving Interval | 19 ft. 1 in. | 24 ft. 1 in. | 29 ft. 2 in. | 34 ft. 1 in. | 39 ft. 1 in. |
Concave Blades | 48 | 60 | 72 | 84 | 96 |
Transport Height Rollers Extended Rollers Retracted |
12 ft. 5 in. 13 ft.6 in. |
12 ft. 6 in. 13 ft. 7 in. |
13 ft. 10 in. 14 ft. 11 in. |
12 ft. 11 in. 14 ft. 0 in. |
13 ft. 3 in. 14 ft. 4 in. |
Transport Width Rollers Extended Rollers Retracted |
11 ft.8 in. 11 ft.3 in. |
11 ft.8 in. 11 ft.3 in. |
13 ft.4 in. 11 ft.11 in. |
13 ft.4 in. 11 ft.11 in. |
13 ft.4 in. 11 ft.11 in. |
Frame Sections | 2 | 3 | |||
Mainframe structure | 6 in. x 6 in. tubular steel | 6 in. x 6 in. tubular steel | |||
Hitch Structure | 6 in. x 8 in. tubular steel | 6 in. x 10 in. tubular steel | |||
Tires, Mainframe | 600/50-22.5, 10 bolt hub | 600/50-22.5 (30' and 35'), 800/40-22.5 (40' and 35' w/ Otico Roller) | |||
Tires, Wings | 13.5L-15 X 31 on 25' HSD | 500/50R17 (30'), 550/45-22.5 (35' and 40') | |||
Drawbar Hitch | CAT 4 | CAT 5 | |||
Hitch | 8,000 lbs manual jack | Hydraulic jack with manual ball value | |||
Hydraulic Remote Valves Required | 4 | 5 (includes hydraulic jack) |